Implant Retrieval and Analysis Services Publications

Cited Publications

2022

Langton, David J. ; Bhalekar, Rohan M. ; Joyce, Thomas J. ; Rushton, Stephen P. ; Wainwright, Benjamin J. ; Nargol, Matthew E. ; Shyam, Nish ; Lie, Benedicte A. ; Pabbruwe, Moreica B. ; Stewart, Alan J. ; Waller, Susan ; Natu, Shonali ; Ren, Renne ; Hornick, Rachelle ; Darlay, Rebecca ; Su, Edwin P. ; Nargol, Antoni V. F.  “The influence of HLA genotype on the development of metal hypersensitivity following joint replacement”, Communications Medicine, 2022, Vol.2 (1), p.73-73

Ho, Kwok M. ; Chamberlain, Jenny ; Nasim, Sana ; Rogers, Frederick B. ; Kop, Alan  “A prospective ex vivo biomechanical analysis of retrievable inferior vena cava filters”, Journal of vascular surgery. Venous and lymphatic disorders, 2022, Vol.10 (5), p.1095-1100.e

Salasi, M., Wang, K., Pojtanabuntoeng, T., Pabbruwe, M., Quadir, Z., Rickard, W., Guagliardo, P., & Iannuzzi, M. (2022). Three-Body Abrasion-Corrosion Behavior of As-Printed and Solution-Annealed Additively Manufactured 316L Stainless Steel”. Corrosion, 78(5), 390-403.

2021

Bhalekar, R.M., Nargol, M.E., Shyam, N., Nargol, A.V.F., Wells, S.R., Collier, R., Pabbruwe, M., Joyce, T.J. and Langton, D.J. “Tibial tray debonding from the cement mantle is associated with deformation of the backside of polyethylene tibial inserts”, Bone Joint J. 2021 Dec;103-B(12):1791-1801.

Cheung, K. H., Pabbruwe, M., Chen, W., Koshy, P., Sorrell, C. C. “Thermodynamic and microstructural analyses of photocatalytic TiO2 from the anodization of biomedical-grade Ti6Al4V in phosphoric acid or sulfuric acid”, Ceramics International, 1609-1624 (2021).

Hornus, E., Wang, K., Pabbruwe, M., Kop, A., Jones, C., Salleh, A., Salasi, M. and Iannuzzi, M. “A new experimental method to simulate dynamic crevice corrosion in modular hip arthroplasty”, Corrosion Science, 2021-09, Vol.190, p.109704.

Perkins, T.J., Kop, A. M., Whitewood, C. and Pabbruwe, M. B. “Dissociation of polyethylene liners with the DePuy Pinnacle cup: a report of 26 cases”, Hip international, 2021, p.11207000211008459-11207000211008459.

Rebgetz, P., Kovacs, A., Bochat, K., Hayes, A., Clark, G., Blakeney, W. and Pabbruwe, M. “Loosening of tibia baseplates after total knee arthroplasty: Evaluation of pull-out strength of tibia baseplate-cement Interface”, Clinical biomechanics (Bristol), 2021-12, Vol.90, p.105497-105497.

2020

Cheung, K.H., Pabbruwe, M.B., Chen, W-F., Koshy, P., Sorrell, C.C. “Effects of substrate preparation on TiO2 morphology and topography during anodization of biomedical Ti6Al4V”, Materials Chemistry and Physics, 252: 123224 (2020).

Kozak, T., Pabbruwe, M. B., Kop, A. M., Clark, G. “Forensic analysis of retrieved score knees: A failure of fixation?", International Journal of Orthopaedics Sciences, 6(3): 773-777 (2020).

Wylde, C. W., Jenkins, E., Pabbruwe, M., Bucher, T., “Catastrophic failure of the Accolade I hip arthroplasty stem: a retrieval analysis study”, HIP International, 30(4): 481–487 (2020).

2019

Ho K.M., Rao S., Honeybul S., Zellweger, R., Wibrow B,. Lipman, J., Holley, A., Kop, A., Geelhoed, E., Corcoran, T., Misur P., Edibam C. “A Multicenter Trial of Vena Cava Filters in Severely Injured Patients”, The New England Journal of Medicine, 381:328-337 (2019).

Lambers A., Rieger B., Kop A., D’Alessandro P., Yates, P. “Implant Fracture Analysis of the TFNA Proximal Femoral Nail”, The Journal of Bone and Joint Surgery, 101(9): 804-811 (2019).

Pineda A., Pabbruwe M., Kop, A., Vlaskovsky P., Hurworth M. “The effect of implant modification: the low contact stress experience”, The Bone & Joint Journal, 101-B(10): 1248–1255 (2019).

2018

Christiner, T., Pabbruwe, M., Kuster, M. “Failure and Fatigue Fracture at the Femoral Stem-Metaphyseal Sleeve Junction in a Modular Knee Prosthesis: A Case Report”, JBJS Case Connector, 8(3): e67 (2018).

Christiner T., Pabbruwe M.B., Kop A.M., Parry J., Clark G., Collopy D. “Taper Corrosion and Adverse Local Tissue Reactions in Patients with a Modular Knee Prosthesis”, JB & JS Open Access, 3(4): e0019 (2018).

Drew, J.O., Glyde, M.R., Hosgood, G.L., Hayes, A.J., "The Effect of Tibial Plateau Levelling Osteotomy on Stifle Extensor Mechanism Load: A Canine Ex Vivo Study", Vet Comp Orthop Traumatol, 31(2):131-136 (2018) PMID: 29534281.

Sinagra, Z.P., Kop, A., Pabbruwe, M. “Foreign Body Reaction Associated With Artificial LARS Ligaments: A Retrieval Study”, Orthopaedic Journal of Sports Medicine, 6(12) (2018).

2017

Calvert, N., Punwar, S., Keogh, C., Kop, A., Khan, R. (2017). "Circumferential ceramic liner fracture in a squeaking hip". Journal of Orthopaedics and Rheumatology, 4(5).

Cheung K.H, Koshy P., Pabbruwe M., Lee B., Sorrell C.C., "Photocatalytic Activation of TiO2 Biomaterials by UV and X-Rays", Advances in Science and Technology, Vol. 99, pp. 22-30, 2017.

Ho K.M., Rao S., Honeybul S., Zellweger, R., Wibrow B,. Lipman, J., Holley, A., Kop, A., Geelhoed, E., Corcoran, T. “Detailed assessment of benefits and risks of retrievable inferior vena cava filters on patients with complicated injuries: the da Vinci multicentre randomised controlled trial study protocol”, BMJ Open, 7: e016747 (2018).

2016

Walcher M.G., Giesinger K., du Sart R., Day R.E., Kuster M.S. "Plate Positioning in Periprosthetic or Interprosthetic Femur Fractures With Stable Implants-A Biomechanical Study", J Arthroplasty. 31(12):2894-2899 (2016) PMID: 27381372.

Preston T.J., Glyde M., Hosgood G., Day R.E. "Dual Bone Fixation: A Biomechanical Comparison of 3 Implant Constructs in a Mid-Diaphyseal Fracture Model of the Feline Radius and Ulna", Vet Surg, 45(3):289-94 (2016) PMID: 27007749.

Wang K., Wu J., Day R., Kirk T.B., Hu X. "Characterizing depth-dependent refractive index of articular cartilage subjected to mechanical wear or enzymic degeneration", J Biomed Opt, 21(9):95002 (2016) PMID: 27626900.

Pearson T., Glyde M.R., Day R.E., Hosgood G.L., "The effect of intramedullary pin size and plate working length on plate strain in locking compression plate-rod constructs under axial load", Vet Comp Orthop Traumatol, 29(6):451-458 (2016) PMID: 27709224.

Kent M., Edmondson M., Ebert J., Nivbrant N., Kop A.M., Wood D., De Steiger (2016). "R3 Stem Migration and Fretting Corrosion of the Antirotation Pin in the K2/Apex Hip System.", J Arthroplasty. Mar;31(3):727-34.

Oldakowski M., Oldakowska I., Kirk T.B., Ford C.T., Sercombe T.B., Hardcastle P., Day R.E., "Pull-out strength comparison of a novel expanding fastener against an orthopaedic screw in an ovine vertebral body: an ex-vivo study", J Med Eng Technol, 40(2):43-51 (2016) PMID: 26758778.

2015

Griffiths J., Colvin A., Yates P., Meyerkort D., Kop A.M., and Prosser G. (2015). "Extreme Cobalt Toxicity: Bearing the Brunt of a Failed Ceramic Liner". JBJS Case Connect, 5(4), e92.

Griffiths J.T., Taheri A., Day R.E., Yates P.J., "Better Axial Stiffness of a Bicortical Screw Construct Compared to a Cable Construct for Comminuted Vancouver B1 Proximal Femoral Fractures", J Arthroplasty, 30(12):2333-7 (2015) PMID: 26239233.

Kop A.M., Pabbruwe M.B., Keogh C., and Swarts E. (2015). "Oxidation of Second Generation Sequentially Irradiated and Annealed Highly Cross-Linked X3™ Polyethylene Tibial Bearings". The Journal of arthroplasty.

Khan, H., Hurworth, M., and Kop, A.M. (2015). "Metallosis following a dual coat porous hydroxyapatite shoulder hemiarthroplasty". Journal of Orthopaedics.

Kop A.M., Pabbruwe M.B., Keogh C., Swarts E., "Oxidation of Second Generation Sequentially Irradiated and Annealed Highly Cross-Linked X3™ Polyethylene Tibial Bearings", J Arthroplasty, [Epub ahead of print], 2015 PMID: 25971535.

Swarts E., Bucher T.A., Phillips M., Yap F.H., "Does the ingrowth surface make a difference? A retrieval study of 423 cementless acetabular components", J Arthroplasty, 30(4):706-12 (2015) PMID: 25515944.

Graham D., Spiers A., Swarts E., Whitewood C. (2015). "Does the Location of the Cutting Flute of Self-Tapping Screws in Bony Substrate affect the Removal Torque?", Open Journal of Orthopaedics. 5 [10] 1-5 (2015).

Wang T., Lin Z., Ni M., Thien C., Day R.E., Gardiner B., Rubenson J., Kirk T.B., Smith D.W., Wang A., Lloyd D.G., Wang Y., Zheng Q., Zheng M.H., "Cyclic mechanical stimulation rescues achilles tendon from degeneration in a bioreactor system", J Orthop Res, 33(12):1888-96 (2015) PMID: 26123799.

2014

Milne L.P., Kop A.M., Kuster M.S. "Polyaxial locking and compression screws improve construct stiffness of acetabular cup fixation: a biomechanical study", J Arthroplasty, 29(5):1043-51 (2014) PMID: 24360790.

Ebrahim L., Morrison D., Kop A.M., Taylor D. "Breast augmentation with an unknown substance". British Medical Journal Case Rep. 2014 Jun 23; 2014.

Whitehouse M.R., Atwal N.S., Pabbruwe M., Blom A.W., Bannister G.C., "Osteonecrosis with the use of polymethylmethacrylate cement for hip replacement: thermal-induced damage evidenced in vivo by decreased osteocyte viability", Eur Cell Mater, 25;27:50-62; discussion 62-3. (2014) PMID: 24464728.

Giesinger K., Ebneter L., Day R.E., Stoffel K.K., Yates P.J., Kuster M.S., "Can plate osteosynthesis of periprosthethic femoral fractures cause cement mantle failure around a stable hip stem? A biomechanical analysis", J Arthroplasty, 29(6):1308-12 (2014) PMID: 24439999.

Beierer L.H., Glyde M., Day R.E., Hosgood G.L., "Biomechanical comparison of a locking compression plate combined with an intramedullary pin or a polyetheretherketone rod in a cadaveric canine tibia gap model", Vet Surg, 43(8):1032-8 (2014) PMID: 25132257.

2013

Swarts E., Kop A.M., Nilasaroya A., Keogh C.V., Cooper T., "Rupture of poly implant prothèse silicone breast implants: an implant retrieval study", Plast Reconstr Surg, 131(4):480e-9e (2013) PMID: 23249979.

Wang T., Lin Z., Day R.E., Gardiner B., Landao-Bassonga E., Rubenson J., Kirk T.B., Smith D.W., Lloyd D.G., Hardisty G., Wang A., Zheng Q., Zheng M.H., "Programmable mechanical stimulation influences tendon homeostasis in a bioreactor system", Biotechnol Bioeng, 110(5):1495-507 (2013) PMID: 23242991.

He B., Wu J.P., Xu J., Day R.E., Kirk T.B., "Microstructural and compositional features of the fibrous and hyaline cartilage on the medial tibial plateau imply a unique role for the hopping locomotion of kangaroo", PLoS One. 18;8(9):e74303 (2013) PMID: 24058543.

2012

Swarts E., Kop A.M., Phillips M., "What are the predictors for bead shedding in porous-coated hip and knee arthroplasties?: An implant retrieval study", J Arthroplasty, 27(10):1789-95 (2012) PMID: 22770858.

Kop A.M., Keogh C., Swarts E., "Proximal component modularity in THA--at what cost? An implant retrieval study", Clin Orthop Relat Res, 470(7):1885-94(2012) PMID: 22048865.

Wang K., Wu J., Day R.E., Kirk T.B., "Utilizing confocal microscopy to measure refractive index of articular cartilage", J Microsc, 248(3):281-91(2012) PMID: 2314037.

2011

Baker R., Whitehouse M., Kilshaw M., Pabbruwe M., Spencer R., Blom A., Bannister G. "Maximum temperatures of 89°C recorded during the mechanical preparation of 35 femoral heads for resurfacing", Acta Orthopedica, 82 [6] 669-673 (2011).

Mansell J.P., Nowghani M., Pabbruwe M., Paterson I.C., Smith A.J., Blom A.W. "Lysophosphatidic acid and calcitriol cooperate to promote human osteoblastogenesis: requirement of albumin-bound LPA", Prostaglandins Other Lipid Mediators, 95 [1-4] 45-52 (2011).

Smith R.L., Murphy D.J., Day R.E., Lester G.D., "An ex vivo biomechanical study comparing strength characteristics of a new technique with the three-loop pulley for equine tenorrhaphy", Vet Surg, 40(6):768-73 (2011) PMID: 21770981.

Taylor P.R., Day R.E., Nicholls R.L., Rasmussen J., Yates P.J., Stoffel K.K., "The comminuted midshaft clavicle fracture: a biomechanical evaluation of plating methods", Clin Biomech (Bristol, Avon), 26(5):491-6 (2011) PMID: 21257237.

2010

Pabbruwe M.B., Kafienah W., Tarlton J.F., Mistry S., Fox D.J., Hollander A.P., "Repair of meniscal cartilage white zone tears using a stem cell/collagen-scaffold implant", Biomaterials, 31[9] 2583-2591 (2010).

Pabbruwe M., Kafienah W., Esfandiari E., Tarlton J., Hollander A.P., "Induction of cartilage integration in vitro by a chondrocyte/collagen-scaffold implant", Biomaterials, 30 [26] 4277-4286 (2010).

Mansell J.P., Barbour M., Moore C., Nowghani M,. Pabbruwe M., Sjostrom T., Blom A.W., "The synergistic effects of lysophosphatidic acid receptor agonists and calcitriol on MG63 maturation at titanium and hydroxyapatite surfaces", Biomaterials, 31 [2] 199-206 (2010).

2009

Kop A.M., Swarts E., "Corrosion of a hip stem with a modular neck taper junction: a retrieval study of 16 cases", J Arthroplasty, 24(7):1019-23 (2009) PMID: 18835686.

Waddington M.S., Paech M.J., Kurowski I.H., Reed C.J., Nicholls G.J., Guy D.T., Day R.E., "The influence of gender and experience on intubation ability and technique: a manikin study", Anaesth Intensive Care, 37(5):791-801 (2009) PMID: 19775044.

Qian Y., Lin Z., Chen J., Fan Y., Davey T., Cake M., Day R.E., Dai K., Xu J., Zheng M., "Natural bone collagen scaffold combined with autologous enriched bone marrow cells for induction of osteogenesis in an ovine spinal fusion model", Tissue Eng Part A, 15(11):3547-58 (2009) PMID: 19459781.

2008

Lam L.O., Stoffel K., Kop A.M., Swarts E., "Catastrophic failure of 4 cobalt-alloy Omnifit hip arthroplasty femoral components", Acta Orthop, 79(1):18-21 (2008) PMID: 18283567.

Yates P.J., Quraishi N.A., Kop A.M., Howie D.W., Marx C., Swarts E., "Fractures of modern high nitrogen stainless steel cemented stems: cause, mechanism, and avoidance in 14 cases", J Arthroplasty, 23(2):188-96 (2008) PMID: 18280411.

Swarts E., Kop A.M., Jones N., Keogh C., Miller S., Yates P., "Microstructural features in fractured high nitrogen stainless steel hip prostheses: a retrieval study of polished, tapered femoral stems", J Biomed Mater Res A., 84(3):753-60 (2008) PMID: 17635035.

Tan B.K., Price R.I., Briffa N.K., Dhaliwal S.S., Day R.E., Singer K., "Assessment of osteoporotic fracture risk in community settings: a study of post-menopausal women in Australia", Health Soc Care Community. 16(6):621-8 (2008) PMID: 18393967.

Kop, A.M., Swarts, E. "Corrosion of a Hip Stem with a Modular Neck Taper Junction. A Retrieval Study of 16 Cases". Journal of Arthroplasty 2008.

2007

Kop A.M., Swarts E., "Quantification of polyethylene degradation in mobile bearing knees: a retrieval analysis of the Anterior-Posterior-Glide (APG) and Rotating Platform (RP) Low Contact Stress (LCS) knee", Acta Orthop, 78(3):364-70 (2007) PMID: 17611851.

Kop A.M., Whitewood C., Johnston D.J., "Damage of oxinium femoral heads subsequent to hip arthroplasty dislocation three retrieval case studies", J Arthroplasty, 22(5):775-9 (2007) PMID: 17689792.

Stewart K., Pabbruwe M.B., Dickinson S., Sims T.J., Hollander A.P., Chaudhuri J.B., "The effect of growth factor treatment on meniscal chondrocytes proliferation and differentiation on polyglycolic acid scaffolds", Tissue Engineering, 13 [12] 271-280 (2007).

Kitson J., Booth G., Day R., "A biomechanical comparison of locking plate and locking nail implants used for fractures of the proximal humerus", J Shoulder Elbow Surg, 16(3):362-6 (2007) PMID: 17368924.

2006

Kop A.M., Swarts E., "Selection of primary hip and knee arthroplasties for public hospitals in Western Australia: a clinical evidence approach", ANZ J Surg, 76(12):1068-74 (2006) PMID: 17199692.

Spencer J.M., Day R.E., Sloan K.E., Beaver R.J., "Computer navigation of the acetabular component: a cadaver reliability study", J Bone Joint Surg Br, 88(7):972-5 (2006) PMID: 16799007.

Pabbruwe M., Bewley M., Hollander A.P., Kafienah W., "Integration of tissue using a new cell-bandage system", International Journal Experimental Pathology, 87 [1] A16-A17 (2006).

Last Updated: 17/11/2022